Product Search
Search results for 'C-780'
Showing 21 - 41 of 563 Total Results
MA-0135
Location: Concrete Cylinder Loading Shelf, CM-2500 Series
Easier loading of 6” cylinders in CM-2500 series machines. . This optional shelf was designed to make loading and positioning of 6” (152 mm) cylinders with pad cap rings both easier and safer in a CM-2500 series machine. The shelf features a heavy-duty steel design with a plastic laminated top, so...
Fresh Concrete Field Testing Kits, 4" x 8"
CA-0515
Location: Fresh Concrete Field Testing
Fresh concrete kit (4" x 8") contains everything you need for routine testing of fresh concrete testing in the field, with all items meeting ASTM standards.
MA-0802
Location: Draw Rod Assembly
Safer, easier and faster changing of test platens and spacers. . The draw rod system is used to adjust the inside vertical working height of the load frame, to allow for testing samples of different heights through the use of spacers and test platens. The system is made up of a steel hand wheel...
(1) option
Location: Carrier Brackets for Masonry Platen
Easier and safer mounting of Block Platen. . The Carrier Bracket is used for safer removal and mounting of the block platen assembly inside the load frame, and should be considered a must have option when testing masonry units. The brackets heavy duty arm is mounted on the rear left hand corner of...
4" Lightweight Retainer Rings (2)
CA-0200-L
Location: Unbonded Capping (Retainers and Pad Caps)
Aluminum retainer rings are 35% lighter than steel caps to reduce fatigue. They are heat-treated and hard anodized for longer wear and durability and conform to ASTM C-1231 specifications.
(3) options
Location: Test Platens
Models available for testing 12” (305 mm) and 8” (203 mm) wide masonry units. . Both models feature large diameter spherical disk and seat assemblies, and platen bearing surface plane to .001” (.025 mm) in any 6” (152 mm) direction, through hardened to HRC 60 and plated for wear and corrosion...
Fresh Concrete Field Testing Kits, 6" x 12"
CA-0510
Location: Fresh Concrete Field Testing
Fresh concrete kits contain everythiung you need for routine testing of fresh concrete testing in the field, with all items meeting ASTM standards.
CA-4000
Location: Windsor Probe
The Windsor Probe from Test Mark evaluates the compressive strength of in-place concrete. Easy online ordering.
SA-0240
Location: Pocket Penetrometer
The Soil Pocket Penetrometer from Test Mark is used for the evaluation and classification of cohesive soils in terms of soil consistency.
AA-0005
Location: Marshall Basic Compression Testing
The Marshall compression machine from Test Mark features threaded rods and heavy duty steel crosshead, for nearly twice the rigidity of other load frames, for more reliable test results.
SA-0245
Location: Shear Vane Tester
The pocket shear vane tester from Test Mark provides a quick and efficient method for determining shear strength values of cohesionless values of soils.
Spacers for CM-0030 and CM-2500 series
(4) options
Location: Spacers
Spacers are used with test platens to adjust the vertical working clearance height inside a machines load frame, for testing samples of various types and sizes to prevent over-extension of the load frames piston. They are manufactured from steel and machined plane on both ends to maintain a...
SA-2032
Location: CBR Accessories
Machined from seamless tubing with a sharpened edge to enable undisturbed samples to be taken in the field, cutting edge is plated for rust resistance. Recess in upper section allows edge to be mounted at either end of the mold to facilitate sample removal in the field.
CA-0610
Location: Air Entrainment/Roll-A-Meter
The lightweight aluminum Roll-A-Meter is used to determine the air content of concrete mixes, and is recommended for concrete containing lightweight aggregates, air-cooled slag or highly porous aggregates.
SA-2250
Location: Mechanical Soil Compactor
The automatic soil compactor from Test Mark is designed to automatically compact soil samples rapidly and produce a uniform degree of compaction.
(2) options
Location: Portable Curing Boxes
Portable Curing Boxes for concrete testing store up to 22 standard 6x12 test cylinders from Test Mark Industries.
(3) options
Location: Vertical Cappers
Test Mark's heavy-duty vertical cappers are used to apply molten capping compound to the ends of concrete cylinders for compression testing and insure the testing forces will be evenly distributed over the ends of the test cylinder.
Test Mark Industries supplies manuals and literature for its construction materials testing equipment products.
(3) options
Location: Triple Beam Balance
Triple Beam Balance features magnetic damping, three graduated-tier beams, larger more stable base, factory installed security built into base and positive poise positioning, all standard.
SA-1122
Location: Manometer Tubes
The economical free-standing Manometer Tube from Test Mark allows each tube to have its own valve to allow running two tests.
